Product ID:REPAIR MATERIAL LIQUID
MSDS Date:09/27/1989
FSC:6520
NIIN:01-215-4105
MSDS Number: BLWFC

Emergency Phone: 302-422-4511

Cage: 16969

Telephone: 717-845-7511

Cage: 16969

METHYL METHACRYLATE MONOMER

ETHYLENE GLYCOL DIMETHACRYLATE

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYE CONTACT: IRRITATION AND POSSIBLE
CORNEAL DAMAGE. INHALATION: CENTRAL NERVOUS SYSTEM DEPRESSION.
SKIN CONTACT: IRRITATION AND SKIN RASH.
Effects of Overexposure:HIGH VAPOR CONCENTRATIONS CAN INDUCE HEADACHE,
NAUSEA, SMARTING OF EYES, AND IRRITATION OF RESPIRATORY SYSTEM.
LIQUID CONTACT WITH EYES OR SKIN CAN CAUSE IRRITATION.
Medical Cond Aggravated by Exposure:FOR PERSONS WITH SENSITIVE SKIN,
THIS PRODUCT MAY CAUSE IRRITATION OR RASH.

First Aid:INHALATION: MOVE SUBJECT TO FRESH AIR. GIVE OXYGEN OR
ARTIFICIAL RESPIRATION AS REQUIRED. INGESTION: INDUCE VOMITING AND
CONSULT PHYSICIAN IMMEDIATELY. EYE AND SKIN CONTACT: FLUSH EYES
WITH WATER FO R AT LEAST 15 MIN. AND CONSULT PHYSICIANIF IRRITATION
IS APPARENT. WASH SKIN WITH SOAP AND WATER.

Flash Point Method:OC
Flash Point:55.0F,12.8C
Lower Limits:2.1
Upper Limits:12.5
Extinguishing Media:FORM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:WEAR MESA/NIOSH-APPROVED SELF-CONTAINED
BREATHING APPARATUS. FIGHT FIRE FROM A SAFE DISTANCE OR A PROTECTED
AREA. USE COLD WATER SPRAY TO COOL CONTAINERS.
Unusual Fire/Explosion Hazard:VAPORS MAY TRAVEL TO SOURCE OF IGNITION
AND FLASH BACK. HEAT CAN INDUCE POLYMERIZATION WITH RAPID RELEASE
OF ENERGY WHICH MAY RUPTURE CONTAINERS EXPLOSIVELY.

Spill Release Procedures:ELIMINATE IGNITION SOURCES. AVOID BREATHING
VAPORS. DIKE AND ABSORB SPILL WITH INERT MATERIAL AND REANSFER TO
CONTAINERS FOR DISPOSAL USING NON-SPARKING TOOLS. REMOVE STAURATED
CLOTHING AND WASH AFFEC TED SKIN AREAS WITH SOAP AND WATER.
Neutralizing Agent:NONE

Handling and Storage Precautions:STORE AT AMBIENT TEMPERATURES AND OUT
OF DIRECT SUNLIGHT. KEEP AWAY FROM SPARKS AND OPEN FLAME.
Other Precautions:AVOID REPEATED BREATHING AND CONTACT WITH SKIN. USE
ADEQUATE VENTILATION.

Respiratory Protection:SELF-CONTAINED BREATHING APPARATUS DURING HIGH
VAPOR CONCENTRATIONS.
Ventilation:USE LOCAL EXHAUST TO KEEP BELOW TLV AND LEL.
EXPLOSION-PROOF MOTORS SHOULD BE USED IN MECHANICAL VENTILATION.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:SPLASH-PROOF GOGGLES.
Other Protective Equipment:IMPERVIOUS APRON AND OVERSHOES DURING
CLEAN-UP OPERATION.
Work Hygienic Practices:OBSERVE NORMAL CARE WHEN WORKING WITH
CHEMICALS.
Supplemental Safety and Health
NONE

HCC:F2
Boiling Pt:=101.1C, 214.F
Vapor Pres:29 MM HG
Vapor Density:3.45
Spec Gravity:0.94
Solubility in Water:SLIGHT
Appearance and Odor:COLORLESS LIQUID WITH ACRYLIC ODOR.

Stability Indicator/Materials to Avoid:YES
REDUCING AND OXIDIZING AGENTS.
Stability Condition to Avoid:ELEVATED TEMPERATURES AND IGNITION
SOURCES.
Hazardous Decomposition Products:ACID FUMES AND CARBON MONOXIDE AND/OR
CARBON DIOXIDE.
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES, REDUCING AND
OXIDIZING AGENTS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH FEDERAL, STATE AND
LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.